aimed at precision
英 [eɪmd æt prɪˈsɪʒn]
美 [eɪmd æt prɪˈsɪʒn]
【机】目标准确度
双语例句
- Aimed at the conflicts of high speed, high precision and low noise, the improved design for structure joint ways of the motor and variable pump was proposed.
针对高速度、高精度和低噪声之间的矛盾，提出了对电机和泵联接方式的结构改进设计。 - Aimed at Jetta steering knuckle, the technology of two forging steps in one heat was presented, which combined precision pre-forging by extrusion-belt obliterated extrusion with open finish-forging.
以捷达轿车转向节为研究对象，制定了挤压带式可分凹模闭塞挤压精密预制坯和开式终锻成形相结合的“一火两锻”成形工艺。 - Aimed at the problem of inspecting velocity and precision in the quality inspecting of high precision printing image, the paper presented a real_time image defect recognization algorithm, which is based on dynamic threshold and storied inspect.
针对高精度印刷图像的质量检测中的检测速度和检测精度问题，本文提出了一种基于动态灰度阈值和分层检测的高精度印刷品质量检测的实时的图像缺陷识别算法。 - Aimed at the problems of low solution precision by genetic algorithm and slow resolving speed by ant algorithm, a hybrid algorithm based on genetic algorithm and ant algorithm was presented.
针对遗传算法求解精度低以及蚂蚁算法求解速度慢的问题，提出一种基于遗传算法和蚂蚁算法的混合算法。 - Aimed at this problem, this paper brings forward that application of landscape heterogeneity indices will ensure success and precision of ecological restoration.
针对这一问题，在土地利用格局分析的基础上，提出运用景观异质性指标对受损景观的生态恢复和重建进行定量分析，从而提高结果的精确性和成功率。 - Aimed at the lower imprint precision in imprint lithography process due to the thermally induced errors, a finite element model of the imprint spindle was constructed and the temperature field of the imprint spindle was acquired.
在压印光刻工艺中，针对压印机由于温度变化而引起的热误差，通过建立压印机压印轴有限元分析模型，对其温度分布进行了仿真计算。 - Aimed at the AS-R wheeled mobile robot, this paper mainly studied that how to utilize Real Time Extension Technology to realize the precision control to the motion of the AS-R robot, and the navigation of wheeled mobile robot based on self-vision.
本文以AS-R轮式移动机器人为实验平台，主要研究如何利用RealTimeExtension技术实现对AS-R机器人较为精确的运动控制，并在此基础上研究了基于自主视觉的轮式移动机器人导航控制问题。 - The processing precision of gear hobbing machine with zero-drive chain was analyzed. Aimed at the influence factors of the precision of gear, some measures were presented.
本文从滚齿机机床误差和滚齿加工误差等方面对零传动数控滚齿机进行了详细的精度分析，并针对加工过程中可能影响齿轮精度的因素给出相应的措施。 - This paper presented the diesel engine modeling method named cylinder moving based on the filling and emptying method, aimed at settling the conflict of precision and real-time performance in the ECU hardware-in-loop simulation ( HILS).
为了解决柴油机ECU硬件在环仿真时，柴油机模型的精确度和实时性的矛盾，提出了基于充排法的柴油机缸平移建模方法。 - Aimed at tri-coordinate ultra precision machining, a stage used for tri-coordinate non-traditional machining was designed, which realizes long travel tri-coordinate ultra precision machining.
本文以三维结构的超精密加工为对象，进行了适合超精密三维结构特种加工运动平台的设计，实现了较大行程的三维精密运动。 - Aimed at noise polluted for data on site, a kind of noise cancellation method based on wavelet analysis is studied; the results show that precision can be increased.
针对现场采集的数据易受噪声污染问题，研究了基于小波分析的降噪方法，提高了识别精度。 - This text aimed at the trait of proper motion artillery engine, expatiated the elements and experiment method how to survey rev of proper motion artillery engine by PC control technic, and particularly analysed the survey precision. The method is doable in the practice exertion.
针对自行火炮发动机的特点，本文阐述了利用PC机控制技术，对自行火炮发动机转速的测量原理及实验方法，并对测量精度作了具体分析，在实际运用中是可行的。 - A Fuzzy-proportional-integral ( FPI) controller for diesel two-stage vibration isolation system, as proposed in this paper, is aimed at overcoming the poor precision of stability affecting a Fuzzy logical controller.
针对模糊控制器存在稳态精度欠佳问题，提出了一种应用于柴油机双层隔振系统的Fuz-zy-PI控制器。 - The test is aimed at reconstructing the dynamic process of vehicle collision, as well as the precision of the trolley simulation generally uses the coincidence of trolley and real vehicle acceleration – time curves ( collision pulse for short) to evaluate.
台车试验的目的在于重现实车碰撞的动力学过程，一般用台车与实车加速度？时间历程曲线（简称碰撞脉冲）的重合性来评价台车模拟的精度。 - Aimed at electrical field calculation the high precision fast BEM software package is developed elementarily.
基本完成了针对电场计算的高精度快速边界元程序软件包的研制。 - Aimed at the problems of the low precision of the load forecasting and high energy industries accounted for the issue of absolute superiority in Shizuishan region, this paper puts forward a method of the industry-classified load forecasting which can more accurately reflect changes in various industries load.
论文针对以往石嘴山地区负荷预测中准确度不高，高耗能行业占绝对优势的问题，提出了根据本地区负荷的具体特点采用分行业预测的方法，这更能真实反映各行业负荷变化情况。